Paints Interprotect Part A Base Grey Epoxy Primer 3.75 L | 4Boats

Interprotect Part A Base Grey is the base component of a two-part epoxy marine primer system from International. It must be mixed with the correct Part B hardener before use; refer to the product technical data sheet for exact mixing ratios, pot life, thinning, coverage and overcoating windows.

• Interprotect Part A — Base Grey
• 3.75 L (0.83 imp gal)
• Two-part epoxy primer (Part A base component)
• Surface-tolerant, anti-corrosive barrier primer
• Suitable for steel, aluminium, GRP, timber and sound existing coatings when prepared correctly
• Can be used above and below the waterline when applied as directed
• Overcoatable with a wide range of finishes including antifouling and topside paints
• Application: brush, roller, conventional and airless spray (see TDS for recommended thinning and spray settings)
• Clean-up and thinning: use the solvent recommended in the technical data sheet
• Always mix with the specified Part B hardener and follow TDS instructions for pot life and number of coats

Supplied by International — check the technical data sheet for full application instructions, exact mixing ratios and compatibility. For other options see our marine primers and the International Interprotect collection.

Interprotect Part A Base Grey is the base component of a two-part epoxy marine primer system from International. It must be mixed with the correct Part B hardener before use; refer to the product technical data sheet for exact mixing ratios, pot life, thinning, coverage and overcoating windows.

• Interprotect Part A — Base Grey
• 3.75 L (0.83 imp gal)
• Two-part epoxy primer (Part A base component)
• Surface-tolerant, anti-corrosive barrier primer
• Suitable for steel, aluminium, GRP, timber and sound existing coatings when prepared correctly
• Can be used above and below the waterline when applied as directed
• Overcoatable with a wide range of finishes including antifouling and topside paints
• Application: brush, roller, conventional and airless spray (see TDS for recommended thinning and spray settings)
• Clean-up and thinning: use the solvent recommended in the technical data sheet
• Always mix with the specified Part B hardener and follow TDS instructions for pot life and number of coats

Supplied by International — check the technical data sheet for full application instructions, exact mixing ratios and compatibility. For other options see our marine primers and the International Interprotect collection.