2000W 48V Pure Sine Wave Inverter Remote | 4Boats

2000W 48 V pure sine wave inverter with wireless On/Off remote control, 5 V/2 A USB port and built-in protections — ideal for boats, motorhomes and off-grid systems.

• Suitable for a wide range of appliances, including motor-driven and sensitive electronic devices.
• Input: 48 V DC (40–60 V)
• Output: 230–240 V AC, 50 Hz
• Waveform: pure sine wave; THD <3%
• Continuous power: 2000W; Surge/peak power: 4000W
• Peak efficiency: 90%
• Low battery alarm: 42.0 V ±2.0 V DC
• Low battery shutdown: 40.0 V ±2.0 V DC
• High voltage shutdown: 62.0 V ±2.0 V DC
• Thermal shutdown: 60 ±5°C
• Rated USB output: 5 V/2 A
• Wireless remote control radius: approx. 50 m (164 ft)
• Size (inc. terminals): 390 x 220 x 95 mm (15.4 x 8.7 x 3.7 in)
• Weight: 5.0 kg (11.0 lb)
• Protections: over-discharge, overload, overheating and short-circuit automatic shutdown
• Compatibility/care: Designed for 48 V battery banks and solar systems — ensure correct cable sizing, appropriate fusing and adequate ventilation during installation. 48 V systems typically require thinner DC cabling than equivalent 12 V or 24 V setups, reducing copper weight and voltage drop. Not for direct connection to AC mains.

2000W 48 V pure sine wave inverter with wireless On/Off remote control, 5 V/2 A USB port and built-in protections — ideal for boats, motorhomes and off-grid systems.

• Suitable for a wide range of appliances, including motor-driven and sensitive electronic devices.
• Input: 48 V DC (40–60 V)
• Output: 230–240 V AC, 50 Hz
• Waveform: pure sine wave; THD <3%
• Continuous power: 2000W; Surge/peak power: 4000W
• Peak efficiency: 90%
• Low battery alarm: 42.0 V ±2.0 V DC
• Low battery shutdown: 40.0 V ±2.0 V DC
• High voltage shutdown: 62.0 V ±2.0 V DC
• Thermal shutdown: 60 ±5°C
• Rated USB output: 5 V/2 A
• Wireless remote control radius: approx. 50 m (164 ft)
• Size (inc. terminals): 390 x 220 x 95 mm (15.4 x 8.7 x 3.7 in)
• Weight: 5.0 kg (11.0 lb)
• Protections: over-discharge, overload, overheating and short-circuit automatic shutdown
• Compatibility/care: Designed for 48 V battery banks and solar systems — ensure correct cable sizing, appropriate fusing and adequate ventilation during installation. 48 V systems typically require thinner DC cabling than equivalent 12 V or 24 V setups, reducing copper weight and voltage drop. Not for direct connection to AC mains.