200W Monocrystalline Solar Panel 2×1 m Cables MC4 Waterproof | 4Boats

200W monocrystalline solar panel with 2x1 m cables — waterproof, high-efficiency and suitable for permanent outdoor use to charge 12 V battery systems.

• Peak power: 200 W. Maximum power voltage (Vmp): 38.80 V. Maximum power current (Imp): 5.15 A. Open-circuit voltage (Voc): 45.00 V. Short-circuit current (Isc): 5.80 A. Power tolerance: 0/+3%.
• Dimensions: 132 x 99 x 3.5 cm (52.0 x 39.0 x 1.4 in). Weight: 15.5 kg (34.2 lb).
• 2 x 1 m (3.28 ft) of high-quality single-core solar cable, 4.0 mm² cross-section, fitted with male and female MC4 connectors for easy interconnection.
• Durable waterproof aluminium frame with long-lasting monocrystalline solar cells (manufacturer of solar cells not specified).
• Mounting holes provided for secure installation.
• Charging recommendation: For 12 V batteries this panel requires a high-efficiency 20 A MPPT solar charge controller; for 24 V systems a standard 20 A controller may be used though MPPT will charge faster.
• Panels may be connected in series or parallel to increase system voltage or current as required.
• Each panel is individually tested and labelled with a unique serial number. This panel does not include an installation manual and should be connected by a qualified installer; see the Details and Specifications tab for more information.

Care: wipe clean with fresh water and mild detergent as needed; MC4 connectors can be cut for direct wiring to compatible controllers if required.

200W monocrystalline solar panel with 2x1 m cables — waterproof, high-efficiency and suitable for permanent outdoor use to charge 12 V battery systems.

• Peak power: 200 W. Maximum power voltage (Vmp): 38.80 V. Maximum power current (Imp): 5.15 A. Open-circuit voltage (Voc): 45.00 V. Short-circuit current (Isc): 5.80 A. Power tolerance: 0/+3%.
• Dimensions: 132 x 99 x 3.5 cm (52.0 x 39.0 x 1.4 in). Weight: 15.5 kg (34.2 lb).
• 2 x 1 m (3.28 ft) of high-quality single-core solar cable, 4.0 mm² cross-section, fitted with male and female MC4 connectors for easy interconnection.
• Durable waterproof aluminium frame with long-lasting monocrystalline solar cells (manufacturer of solar cells not specified).
• Mounting holes provided for secure installation.
• Charging recommendation: For 12 V batteries this panel requires a high-efficiency 20 A MPPT solar charge controller; for 24 V systems a standard 20 A controller may be used though MPPT will charge faster.
• Panels may be connected in series or parallel to increase system voltage or current as required.
• Each panel is individually tested and labelled with a unique serial number. This panel does not include an installation manual and should be connected by a qualified installer; see the Details and Specifications tab for more information.

Care: wipe clean with fresh water and mild detergent as needed; MC4 connectors can be cut for direct wiring to compatible controllers if required.