300W Semi-Flexible Solar Panel — Rear Junction Box, Made in Austria

High-efficiency 300W semi-flexible monocrystalline solar panel with rear junction box, designed for curved or flat roofs on boats, caravans, motorhomes and RVs.

• Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions.
• Robust fibreglass-reinforced plastic construction; sealed waterproof design with high resistance to salt water — ideal for marine use.
• Rear-mounted junction box and cables give a smooth, level finish; to be fully flush-mounted a recess in the roof/surface is required.
• Electrical specifications: Peak power 300 W; maximum power voltage (Vmp) 33.8 V; maximum power current (Imp) 9 A; open-circuit voltage (Voc) 41.1 V; short-circuit current (Isc) 9.6 A.
• Dimensions: 1,756 x 1,020 x 2 mm (69.1 x 40.2 x 0.Ø 8 in). Weight: 6 kg (13.2 lb).
• For charging 12 V or 24 V battery banks — this panel requires a suitable solar charge controller/regulator (sold separately).
• Fitting: normally secured to a roof using a suitable sealant/adhesive; can also be fastened with self-tapping screws, tenax fasteners or zip ties. Adhesive not included.
• Manufactured in Austria to IEC European standards using Austrian and German components. User manual for semi-flexible solar panels FLPRO series available to download.

Care/compatibility: clean with fresh water and a soft cloth, avoid sharp objects or excessive bending, and follow the supplied user manual for mounting, cable routing and connection to charge controllers.

High-efficiency 300W semi-flexible monocrystalline solar panel with rear junction box, designed for curved or flat roofs on boats, caravans, motorhomes and RVs.

• Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions.
• Robust fibreglass-reinforced plastic construction; sealed waterproof design with high resistance to salt water — ideal for marine use.
• Rear-mounted junction box and cables give a smooth, level finish; to be fully flush-mounted a recess in the roof/surface is required.
• Electrical specifications: Peak power 300 W; maximum power voltage (Vmp) 33.8 V; maximum power current (Imp) 9 A; open-circuit voltage (Voc) 41.1 V; short-circuit current (Isc) 9.6 A.
• Dimensions: 1,756 x 1,020 x 2 mm (69.1 x 40.2 x 0.Ø 8 in). Weight: 6 kg (13.2 lb).
• For charging 12 V or 24 V battery banks — this panel requires a suitable solar charge controller/regulator (sold separately).
• Fitting: normally secured to a roof using a suitable sealant/adhesive; can also be fastened with self-tapping screws, tenax fasteners or zip ties. Adhesive not included.
• Manufactured in Austria to IEC European standards using Austrian and German components. User manual for semi-flexible solar panels FLPRO series available to download.

Care/compatibility: clean with fresh water and a soft cloth, avoid sharp objects or excessive bending, and follow the supplied user manual for mounting, cable routing and connection to charge controllers.