Victron 16A 24V Blue Smart IP22 Charger with Bluetooth | 4Boats

Compact 16 A 24 V Victron Blue Smart IP22 mains charger with Bluetooth (Product code: BPC241647022) for safe, unattended charging and remote monitoring of 24 V battery banks.

• Compatible batteries: Gel, Wet cell, AGM and Lithium (dedicated lithium mode). Batteries in parallel must be same type, capacity and age.
• Safe unattended charging: inbuilt protection against DC short circuit, overheating, overcharging and reverse polarity so the unit can remain permanently connected.
• Adaptive 6-stage battery management: automatically adapts and optimises charging, reducing time in absorption when possible to limit corrosion.
• Continued charging during use: maintains charge while energy is being drawn by loads; power supply function can feed a 24 V load even with no battery connected.
• Dead battery recovery: will attempt to recharge a deeply discharged battery (starts charging from 0 V) at low current to revive flat batteries.
• Silent night/low mode and Storage Mode: selectable low-current "night" mode (8 A) for quieter operation and a storage mode to reduce ageing and sulphation when not in use.
• Bluetooth connectivity via the VictronConnect app for remote monitoring and programming; inbuilt temperature sensor for automatic compensation and 9 front-panel LEDs indicate charging stage and status.
• Key specifications: Input voltage 180-265 V AC; DC output current 16 A (normal) / 8 A (night); output voltage 24 V. Minimum battery capacity (normal): Lead-acid 53 Ah, Lithium 32 Ah. Minimum in low mode: Lead-acid 27 Ah, Lithium 16 Ah.
• Electrical & physical: Absorption voltage 28.4-29.4 V DC (depending on battery), Float ~27.0 V DC. Starts charging at 0 V. Efficiency 94%. Standby / no-load power consumption: 0.5 W. Temperature compensation: -3 mV/°C per cell (≈ -36 mV/°C for a 24 V battery). Humidity (non-condensing): max 95%. Protection IP22 (indoor). Operating temperature -20°C to +50°C (-4°F to 122°F). Dimensions 235 x 108 x 65 mm (9.25 x 4.25 x 2.56 in). Weight 1.3 kg (2.9 lb).

Suitable for marine and stationary 24 V systems. For best results, follow battery manufacturer recommendations when selecting charging profiles and use the VictronConnect app to configure battery type and settings. Indoor use only (IP22).

Compact 16 A 24 V Victron Blue Smart IP22 mains charger with Bluetooth (Product code: BPC241647022) for safe, unattended charging and remote monitoring of 24 V battery banks.

• Compatible batteries: Gel, Wet cell, AGM and Lithium (dedicated lithium mode). Batteries in parallel must be same type, capacity and age.
• Safe unattended charging: inbuilt protection against DC short circuit, overheating, overcharging and reverse polarity so the unit can remain permanently connected.
• Adaptive 6-stage battery management: automatically adapts and optimises charging, reducing time in absorption when possible to limit corrosion.
• Continued charging during use: maintains charge while energy is being drawn by loads; power supply function can feed a 24 V load even with no battery connected.
• Dead battery recovery: will attempt to recharge a deeply discharged battery (starts charging from 0 V) at low current to revive flat batteries.
• Silent night/low mode and Storage Mode: selectable low-current "night" mode (8 A) for quieter operation and a storage mode to reduce ageing and sulphation when not in use.
• Bluetooth connectivity via the VictronConnect app for remote monitoring and programming; inbuilt temperature sensor for automatic compensation and 9 front-panel LEDs indicate charging stage and status.
• Key specifications: Input voltage 180-265 V AC; DC output current 16 A (normal) / 8 A (night); output voltage 24 V. Minimum battery capacity (normal): Lead-acid 53 Ah, Lithium 32 Ah. Minimum in low mode: Lead-acid 27 Ah, Lithium 16 Ah.
• Electrical & physical: Absorption voltage 28.4-29.4 V DC (depending on battery), Float ~27.0 V DC. Starts charging at 0 V. Efficiency 94%. Standby / no-load power consumption: 0.5 W. Temperature compensation: -3 mV/°C per cell (≈ -36 mV/°C for a 24 V battery). Humidity (non-condensing): max 95%. Protection IP22 (indoor). Operating temperature -20°C to +50°C (-4°F to 122°F). Dimensions 235 x 108 x 65 mm (9.25 x 4.25 x 2.56 in). Weight 1.3 kg (2.9 lb).

Suitable for marine and stationary 24 V systems. For best results, follow battery manufacturer recommendations when selecting charging profiles and use the VictronConnect app to configure battery type and settings. Indoor use only (IP22).