Victron Smart BatteryProtect 220A 12/24V (Bluetooth) | 4Boats

Victron Smart BatteryProtect 220 A 12 V/24 V with inbuilt Bluetooth protects batteries and connected appliances by avoiding deep discharge and overvoltage.

• Low voltage disconnect: when battery charge is low, the Smart BatteryProtect disconnects non‑essential loads to avoid deep discharge and preserve battery health; programmable low‑voltage threshold for customised disconnect settings.
• Overvoltage disconnect: disconnects loads if battery voltage becomes too high to protect equipment; Bluetooth connectivity for easy smartphone programming; automatic system recognition (detects 12 V or 24 V on start‑up).
• Ultra‑low current consumption to avoid additional battery drain, especially after a low‑voltage disconnect; remote switch and alarm connections allow input/output relay control and external alarms.
• Compatible with lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems and as a charge interrupter for lithium charging.
• System specifications: nominal battery voltage 12 V / 24 V; operating voltage range 6–35 V; maximum continuous current 220 A; peak current (30 seconds) 600 A.
• Electrical & safety: current draw <1.5 mA active, <0.6 mA during disconnect; alarm relay 50 mA.
• Dimensions & environment: dimensions 62 x 123 x 120 mm (2.44 x 4.84 x 4.72 in); weight 800 g (1.76 lb); M8 terminals; operating temperature range -40°C to +40°C (-40°F to 104°F) — up to 60% capacity at 50°C (122°F).
• Additional items: negative cable 50 cm length, 1.5 mm² cross section; 2‑pin dry‑contact socket for remote switch. Documents available: User manual for Victron Smart Battery Protect 220 A 12/24 V (VE‑SBPR220) and product datasheet.

Please note: the Smart BatteryProtect must be connected on the positive battery wire, close to the battery. If you need installation help or technical support we can provide guidance and programming assistance.

Victron Smart BatteryProtect 220 A 12 V/24 V with inbuilt Bluetooth protects batteries and connected appliances by avoiding deep discharge and overvoltage.

• Low voltage disconnect: when battery charge is low, the Smart BatteryProtect disconnects non‑essential loads to avoid deep discharge and preserve battery health; programmable low‑voltage threshold for customised disconnect settings.
• Overvoltage disconnect: disconnects loads if battery voltage becomes too high to protect equipment; Bluetooth connectivity for easy smartphone programming; automatic system recognition (detects 12 V or 24 V on start‑up).
• Ultra‑low current consumption to avoid additional battery drain, especially after a low‑voltage disconnect; remote switch and alarm connections allow input/output relay control and external alarms.
• Compatible with lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems and as a charge interrupter for lithium charging.
• System specifications: nominal battery voltage 12 V / 24 V; operating voltage range 6–35 V; maximum continuous current 220 A; peak current (30 seconds) 600 A.
• Electrical & safety: current draw <1.5 mA active, <0.6 mA during disconnect; alarm relay 50 mA.
• Dimensions & environment: dimensions 62 x 123 x 120 mm (2.44 x 4.84 x 4.72 in); weight 800 g (1.76 lb); M8 terminals; operating temperature range -40°C to +40°C (-40°F to 104°F) — up to 60% capacity at 50°C (122°F).
• Additional items: negative cable 50 cm length, 1.5 mm² cross section; 2‑pin dry‑contact socket for remote switch. Documents available: User manual for Victron Smart Battery Protect 220 A 12/24 V (VE‑SBPR220) and product datasheet.

Please note: the Smart BatteryProtect must be connected on the positive battery wire, close to the battery. If you need installation help or technical support we can provide guidance and programming assistance.